Designed for Light,
Built for Living
Aluminium system doors, windows and skylights specified for Singapore's tropical climate. Thermal-break profiles, water-tight seals and architectural detailing — selected to suit each project's site conditions and consultant specification.
System Doors, Windows
and Skylights
Heavy-duty sliding doors, casement and folding windows, and electric/manual skylight systems — specified to project requirements and Singapore site conditions.
Doors
Heavy sliding, folding, flat & interior door systems
Explore Doors →
Windows
Casement, sliding, folding, American & electric lift windows
Explore Windows →
Skylights
Electric sunroofs, top-hung & sliding skylight systems
Explore Skylights →Aluminium Catalogues & Spec Sheets
Reference our aluminium doors and windows, premium door, sunshade and gate catalogues. Profile sizes, glazing options and configuration notes used on Singapore projects.
Doors & Windows
Aluminium System Catalogue
Casement, sliding, folding and electric-lift windows; heavy sliding, folding, flat and pivot doors. 158-page reference.
View Catalogue →Premium Range
Premium Door Catalogue
Flagship pivot, swing and entrance aluminium doors for high-end Singapore homes — reinforced sections and premium finishes.
View Catalogue →Shading Systems
Sunshade Catalogue
Fixed and adjustable louvre, awning and pergola sunshade for Singapore facades. Cuts solar gain on glazed openings.
View Catalogue →Aluminium Gates
Gate Catalogue
EZ-2200 swing and sliding aluminium gates for Singapore landed homes — powder-coat and fluorocarbon finishes.
View Catalogue →8 Performance Attributes
EZZO products are designed around eight performance attributes relevant to Singapore's tropical climate. Actual performance is subject to product selection, IGU specification and site conditions, and is confirmed against the supplier datasheet for each project.
Multi-chamber profiles with co-extruded EPDM gaskets and drainage channels are designed to resist water infiltration; rated performance is confirmed against the chosen system's test report.
Heavy-gauge profile walls (typically 2.0–5.0 mm) and reinforced corner joinery are specified to suit project height and exposure, subject to wind-load calculation by the project engineer.
PA66 nylon thermal-break inserts combined with Low-E insulated glass units (IGU) are designed to reduce conductive heat transfer through the frame and glass. Quoted U-values depend on the glass build-up and frame system selected.
Profiles use 6063-T5 aluminium alloy (per supplier specification) with branded hardware sets and factory inspection at fabrication. Final material certification accompanies each order.
Multi-chamber profiles and IGU configurations (e.g. asymmetric panes with up to ~27 mm air/argon cavity) can be specified for noise reduction; achievable Rw / STC depends on glass build-up and installation detailing.
Precision-milled profiles with co-extruded EPDM gaskets are designed to limit air infiltration. Rated air-tightness class is selected based on project requirements and supplier datasheet.
Multi-point locking, reinforced hook rails and anti-lift profiles can be specified where required. Final hardware specification follows project requirements and applicable standards.
Heavy-gauge profile wall thicknesses (typically 2.0–5.0 mm) support large-format door and window panels; maximum panel size is governed by structural calculation, glass weight and hardware capacity.
Glass Options for Doors, Windows & Skylights
Glass build-up can be specified to suit thermal, acoustic, safety and privacy requirements. Available options span Low-E coated, laminated safety, smart/dimming, tinted, and decorative art glass — selected per project brief and supplier specification.
View All ProductsStandard Colour Range
From Inquiry to Installation
A structured, transparent process from your first enquiry to final handover and after-sales support.
Reach out, share your requirements. We'll arrange a site visit and provide a detailed quotation.
Sign the contract, submit deposit, and we schedule your production slot immediately.
Precision CNC fabrication with full quality inspection at our production facility.
Protected packaging, careful logistics, and secure delivery to your Singapore address.
Professional installation team with full guidance, site supervision, and customer acceptance check.
Ongoing support, updates, and a long-term partnership for future projects.
From the EZZO Blog
Complete Guide to Glass Types for Aluminium Sliding Doors & Windows
The definitive reference for every glass type — LOW-E, laminated, smart, dimming, bulletproof — with U-values, SHGC, and real specifications.
Read Article →
Choosing the Right IGU Configuration for Sliding Doors & Windows
A 5-step decision framework — profile compatibility, panel weight, and budget tiers for every EZZO sliding system.
Read Article →
Why Insulated Glass Unit Windows & Frames Matter for Every Singapore Home
Thermal comfort, energy savings, noise reduction, and 25-year durability — why IGU windows are essential.
Read Article →